[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 5, Issue 1 (Winter, 2018) ::
Environ. health eng. manag. 2018, 5(1): 15-21 Back to browse issues page
Optimizing functions of coagulants in treatment of wastewater from metalworking fluids: Prediction by RSM method
Hamzeh Ali Jamali , Maryam Moradnia
Department of Environmental Health Engineering, School of Health Isfahan University of Medical Sciences, Isfahan, Iran , maryam.moradnia2000@gmail.com
Abstract:   (1493 Views)
Background: Coagulation is a treatment procedure for metalworking fluids (MWFs). This study aimed to optimize coagulation using four coagulants and compare the results.
Methods: In this research, the outputs of a coagulation procedure in chemical oxygen demand (COD) removal, turbidity, and the release of oil were investigated using four coagulants, ferric chloride (FeCl3), ferric sulfate (Fe2(SO4)3, calcium chloride (CaCl2), and aluminum sulfate (Al2(SO4)3. To optimize the process, a central composite design (CCD) and response surface methodology (RSM) were used.
Results: Under optimal conditions for using calcium chloride (coagulant concentration 4.2 g/L and pH 3.71), COD and turbidity removals and oil released were respectively 93%, 96.9%, and 31.8 mL. COD and turbidity removals and oil released using aluminum sulfate as a coagulant under optimal conditions (5.36 g/L, pH 4.64) were 75.7%, 89.9%, and 28.9 mL, respectively. With respect to ferric sulfate under optimal conditions (6.25 g/L, pH 3.4), COD and turbidity removals were 60% and 84.1%, respectively and oil released was 16.1 ml. COD and turbidity removals and the greatest amount of oil released by ferric chloride under optimal conditions (3.16 g/L, pH 3.5) were 54.4%, 84.7%, and 15.9 ml, respectively.
Conclusion: Compared with other coagulants in the treatment of MWFs, calcium chloride achieved the highest removal efficiency in eliminating pollution indicators.
Keywords: Wastewater treatment, Metalworking fluids, Response surface methodology, Optimization
eprint link: http://eprints.kmu.ac.ir/id/eprint/27030
Full-Text [PDF 1003 kb]   (421 Downloads)    
Type of Study: Research | Subject: Special
Received: 2018/03/12 | Accepted: 2018/03/12 | Published: 2018/03/12
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA code



XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Jamali H A, Moradnia M. Optimizing functions of coagulants in treatment of wastewater from metalworking fluids: Prediction by RSM method. Environ. health eng. manag.. 2018; 5 (1) :15-21
URL: http://ehemj.com/article-1-316-en.html


Volume 5, Issue 1 (Winter, 2018) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.06 seconds with 30 queries by YEKTAWEB 3781