[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 4, Number 2 (Spring, 2017) ::
Environ. health eng. manag. 2017, 4(2): 93-99 Back to browse issues page
Adsorption of diazinon from aqueous solutions onto an activated carbon sample produced in Iran
Zeynab Akbarlou, Vali Alipour *, Mohsen Heidari, Kavoos Dindarloo
corresponding author: Assistant Professor of Environmental Health Engineering, Department of Environmental Health Engineering, School of Health, Hormozgan University of Medical Sciences, Bandar Abbas, Iran , v_alip@yahoo.com
Abstract:   (466 Views)

Background: Considering the severe health and environmental hazards caused by the entry of diazinon toxin into water resources, its removal is very important. Given the high costs of imported adsorbents, this research attempted to evaluate, for the first time, the efficiency of Iranian activated carbon in removing diazinon from aqueous solutions.
Methods: In this batch experimental study, the effects of contact time (5-90 minutes), adsorbent concentration (0.5-30 g/L), initial concentration of diazinon (5-50 mg/L), and pH (3-10) on the adsorption of diazinon onto the activated carbon were evaluated. Concentrations of diazinon were measured using a high pressure liquid chromatography (HPLC) instrument. The specific surface area of the adsorbent was determined by BET and BJH methods. The experimental adsorption data was analyzed using Langmuir and Freundlich isotherm models. Pseudo first-order and pseudo second-order kinetics models were employed to determine kinetics. Moreover, data was analyzed using SPSS version 19, and Pearson correlation and analysis of variance (ANOVA) tests were performed at a significance level of 0.05.
Results: The optimum contact time, sorbent dose, and pH were 30 minutes, 10 g/L, and 5, respectively. The adsorbent could adsorb diazinon with a removal efficiency of 92.5% under optimum conditions (initial concentration: 20 mg/L). The experimental data was better described by the pseudo-second order kinetic and Langmuir isotherm. A maximum adsorption capacity of 71.4 mg/g was calculated by the Langmuir isotherm model.
Conclusion: With respect to the high adsorption capacity of Iranian activated carbon, this sorbent can be considered an efficient adsorbent for the removal of diazinon from aqueous solutions.

Keywords: Diazinon, Adsorption, Activated carbon, High pressure liquid chromatography
eprint link: http://eprints.kmu.ac.ir/id/eprint/26256
Full-Text [PDF 501 kb]   (337 Downloads)    
Type of Study: Research | Subject: Special
Received: 2017/05/22 | Accepted: 2017/05/22 | Published: 2017/05/22
Send email to the article author

Add your comments about this article
Your username or email:

Write the security code in the box >




DOI: 10.15171/EHEM.2017.13


XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Akbarlou Z, Alipour V, Heidari M, Dindarloo K. Adsorption of diazinon from aqueous solutions onto an activated carbon sample produced in Iran. Environ. health eng. manag.. 2017; 4 (2) :93-99
URL: http://ehemj.com/article-1-255-en.html
Volume 4, Number 2 (Spring, 2017) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.047 seconds with 792 queries by yektaweb 3463