[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 5, Issue 4 ( Autumn 2018) ::
Environ. health eng. manag. 2018, 5(4): 241-248 Back to browse issues page
Application of Taguchi’s experimental design method for optimization of Acid Red 18 removal by electrochemical oxidation process
Zabihollah Yousefi , Ali Zafarzadeh, Abdolaziz Ghezel
Corresponding Author: School of Health and Health Sciences Research Center, Mazandaran University of Medical Sciences, Sari, Iran , abdolaziz.gh1982@gmail.com
Abstract:   (1029 Views)
Background: Electro-oxidation is developed as an electrochemical method to overcome the problems of  the conventional  decolorization technologies and is an appropriate alternative for the treatment of colored wastewater from various industries. The purpose of this study was to evaluate the efficiency of the electrochemical oxidation process in  removal  of chemical oxygen demand (COD) and Acid Red 18 (AR18) dye from aqueous solutions.
Methods: In this research, a laboratory scale of electro-coagulation reactor for the treatment of synthetic wastewater was made and studied. The effects of different variables including pH, current density, dye concentration, and electrolysis time were investigated. The experiment steps were designed by Design-Expert 10 software using the selected variables. Finally, the dye and COD analysis was performed by spectrophotometer. The optimization was performed using Taguchi fractional factorial design during the removal of dye and COD.
Results: Maximum removal of dye (89%) and COD (72.2%) were obtained at pH=3, current density=20 mA/cm2, initial dye concentration=100 mg/L, and reaction time=45 min. ANOVA test showed a significant relationship between  statistical  model and test data. Also, the results indicate that the distribution of the residues of the model was normal.
Conclusion: By designing experiments through Taguchi method, the removal process will be optimized and by decreasing the number of experiments, the optimal conditions for pollutant removal will be prepared. The results suggest that the Electro-oxidation system is a very suitable technique for the enhancement of wastewater treatment.
Keywords: Electrolysis, Wastewater, Azo compounds, Models, Statistical, Analysis of variance
eprint link: http://eprints.kmu.ac.ir/id/eprint/29809
Full-Text [PDF 1238 kb]   (468 Downloads)    
Type of Study: Research | Subject: Special
Received: 2018/12/15 | Accepted: 2018/12/15 | Published: 2018/12/15
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA



XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Yousefi Z, Zafarzadeh A, Ghezel A. Application of Taguchi’s experimental design method for optimization of Acid Red 18 removal by electrochemical oxidation process . Environ. health eng. manag.. 2018; 5 (4) :241-248
URL: http://ehemj.com/article-1-388-en.html


Volume 5, Issue 4 ( Autumn 2018) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.05 seconds with 31 queries by YEKTAWEB 3925