[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 6, Issue 4 (Autumn 2019) ::
Environ. health eng. manag. 2019, 6(4): 225-232 Back to browse issues page
Removal of styrene by the synthesized ZnO nanoparticles coated on the activated carbon adsorbent in the presence of UV irradiation
Mojtaba Nakhaei Pour , Hossein Ali Rangkooy , Fereshteh Jahani , Ameneh Golbaghi , Hosein Shojaee- Farah Abady , Leila Nematpour
Corresponding author: Occupational Health Engineering, Department of Occupational Health, School of Health, Ahvaz Jundishapur University of Medical Sciences, Ahvaz, Iran , Lnematpour94@gmail.com
Abstract:   (1482 Views)
Background: Volatile organic compounds are the major environmental pollutants causing adverse effects on the human health and the environment, therefore, tremendous effort has been put toward eliminating these compounds.
Methods: In this study, the effect of synthesized nanoparticles on the removal of styrene from gas phase by photocatalytic process under UV irradiation in the cylindrical photoreactor was studied. The activated carbon-zinc oxide (AC-ZnO) catalysts were prepared at different weight ratios (6%, 12%, and 18%) of ZnO. The prepared catalyst was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and Brunauer Emmett-Teller (BET) analyses. The effects of various parameters, such as concentrations of styrene, various weight percentage (wt%) of nanoparticles, and UV irradiation, were investigated. The efficiency of the AC-ZnO catalyst was determined based on its adsorption capacity, breakthrough time, and removal efficiency.
Results: It was revealed that the photocatalytic removal efficiency of styrene was high in the presence of both ZnO nanoparticle and AC under UV light. Under optimal conditions, the efficiency of UV/ACZnO 18%, UV/AC-ZnO 12%, and UV/AC-ZnO 6% catalysts was 77%, 86%, and 83%, respectively. By increasing the concentration of input styrene, the photocatalytic removal efficiency was reduced, while the adsorption capacity of styrene increased.
Conclusion: According to the results, the AC-ZnO 12% exhibited higher activity compared to other photocatalysts. Also, the amount of stabilized ZnO nanoparticles on the activated carbon affects the elimination rate of styrene.
Keywords: Photocatalysis, Activated carbon, Styrene, Zinc oxide
eprint link: http://eprints.kmu.ac.ir/id/eprint/32266
Full-Text [PDF 842 kb]   (463 Downloads)    
Type of Study: Research | Subject: General
Received: 2019/12/1 | Accepted: 2019/12/1 | Published: 2019/12/1
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA



XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Nakhaei Pour M, Rangkooy H A, Jahani F, Golbaghi A, Shojaee- Farah Abady H, Nematpour L. Removal of styrene by the synthesized ZnO nanoparticles coated on the activated carbon adsorbent in the presence of UV irradiation. Environ. health eng. manag.. 2019; 6 (4) :225-232
URL: http://ehemj.com/article-1-550-en.html


Volume 6, Issue 4 (Autumn 2019) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.06 seconds with 31 queries by YEKTAWEB 4111