[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 3, Issue 3 (Summer, 2016) ::
Environ. health eng. manag. 2016, 3(3): 137-142 Back to browse issues page
Optimizing potassium ferrate for textile wastewater treatment by RSM
Maryam Moradnia, Masoud Panahi fard, Kavoos Dindarlo, Hamzeh Ali Jamali
Environmental Health Engineering, Health Faculty, Qazvin University of Medical Science, Qazvin, Iran , jamalisadraei@yahoo.com
Abstract:   (11692 Views)

Background: Application of potassium ferrate is a chemical oxidation approach used for water and wastewater treatment. The aim of this study is to apply central composite design (CCD) and response surface methodology (RSM) to optimize potassium ferrate consumption in the treatment of wastewater from carpet industries.

Methods: Samples in this experimental study were collected from wastewater, originating from a carpet factory. Wastewater sampling was carried out monthly for a period of two seasons. Ferrate oxidation experiments were conducted by means of a conventional jar-test apparatus. The time and speed for mixing were set with an automatic controller. Parameters of study were measured based on given methodologies in Standard method for examining water and wastewater. CCD and RSM were applied to optimize the operating variables including potassium ferrate dosage and pH.

Results: Results showed that potassium ferrate concentration (A), pH (B), their interactions (AB) and quadratic effects (A2 and B2) were significant in the removal of COD, turbidity, color and TSS from carpet industries effluents. At an optimum point (COD: 160 mg/L of potassium ferrate and pH 4, turbidity: 165 mg/L of potassium ferrate and pH 4, color and TSS: pH 4.5 and 150 mg/L of potassium ferrate) removal efficiencies for COD, turbidity, color and TSS were86, 86, 87 and 89%, respectively.

Conclusion: Potassium ferrate has a significant impact on pollutants decomposition and the removal of color from wastewater produced in carpet industries. This process can be employed for the pretreatment or post treatment of wastewaters containing refractory organic pollutants. CCD and RSM are suitable tools for experimental design.

Keywords: Advanced treatment, carpet wastewater, Statistical experiment design, Response Surface Methodology
eprint link: http://eprints.kmu.ac.ir/id/eprint/25513
Full-Text [PDF 1244 kb]   (3186 Downloads)    
Type of Study: Original Article | Subject: General
Received: 2016/09/21 | Accepted: 2016/09/21 | Published: 2016/09/21
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA



XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Moradnia M, Panahi fard M, Dindarlo K, Ali Jamali H. Optimizing potassium ferrate for textile wastewater treatment by RSM. Environ. health eng. manag.. 2016; 3 (3) :137-142
URL: http://ehemj.com/article-1-194-en.html


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 3, Issue 3 (Summer, 2016) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.03 seconds with 30 queries by YEKTAWEB 4343