[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 4, Issue 4 (Autumn, 2017) ::
Environ. health eng. manag. 2017, 4(4): 195-201 Back to browse issues page
Removal of acid red 88 from wastewater by adsorption on agrobased waste material. A case study of Iranian golden Sesamum indicum hull
Mahmoud Zarei , Sakha Pezhhanfar, Abolfazl Ahmadi Someh
Research Laboratory of Environmental Remediation, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz, Iran , mzarei@tabrizu.ac.ir
Abstract:   (9757 Views)
Background: Colors are very useful in different industries such as textile and leather but when they enter water, can cause many biological and environmental problems. In the present research, a waste agricultural material which is freely available is employed to analyze its efficiency for removing acid dye from contaminated wastewaters.
Methods: In this study, batch adsorption experiments were performed in the treatment process of acid red 88 (AR88) by Iranian golden Sesamum indicum (IGSI) seeds hull which is produced abundantly in some countries and especially in Iran up to 1100 kg/ha. Also, the effect of operational parameters like adsorption time, pH, dye concentration and adsorbent dosage was studied on pollutant removing efficiency. The experimental data of AR88 adsorption was fitted to Langmuir, Freundlich and Temkin isotherm models. The scanning electron microscopy (SEM) images for the IGSI were taken before and after adsorption process.
Results: The efficiency of dye adsorption on adsorbent was found to be 98.2%. The optimum pH for treatment was 4.5 which is in the acidic range. Enhancing the adsorbent dosage from 0.5 to 2.5 g caused increasing in removal efficiency from 73.85% to 95.85%. Decreasing in dye concentration from 70 to 30 mg/L caused increasing in removal efficiency from 79.73% to 95.83%. The process of adsorption was best fitted to Langmuir model and the amount of dye adsorbed on adsorbent, qe, was found to be 25 mg/g. Comparison between SEM images before and after dye adsorption, showed the significant difference that was due to the dye loading on adsorbent.
Conclusion: The results of present study demonstrated higher dye removal efficiency for AR88 in acidic pHs. Employing the IGSI material in this study proves to be a potential alternative to expensive adsorbents, utilized for the treatment of contaminated industrial waste waters.
Keywords: Adsorption, Acid red 88, Waste products, Sesamum, Waste water, Color removal
eprint link: http://eprints.kmu.ac.ir/id/eprint/26828
Full-Text [PDF 936 kb]   (2167 Downloads)    
Type of Study: Original Article | Subject: Special
Received: 2017/10/8 | Accepted: 2017/10/8 | Published: 2017/10/8
Send email to the article author

Add your comments about this article
Your username or Email:


XML     Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Zarei M, Pezhhanfar S, Ahmadi Someh A. Removal of acid red 88 from wastewater by adsorption on agrobased waste material. A case study of Iranian golden Sesamum indicum hull. Environ. health eng. manag.. 2017; 4 (4) :195-201
URL: http://ehemj.com/article-1-286-en.html

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 4, Issue 4 (Autumn, 2017) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.04 seconds with 30 queries by YEKTAWEB 4331