[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 9, Issue 2 (Spring 2022) ::
Environ. Health Eng. Manag. 2022, 9(2): 115-123 Back to browse issues page
Comparing the performance of UV/Acetylacetone and UV/O3 processes for treatment of olive mill wastewater
Roya Radmehr , Mohammad Rafiee , Ahmadreza Yazdanbakhsh
Corresponding author: Workplace Health Promotion Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran , yazdanbakhsh@sbmu.ac.ir
Abstract:   (469 Views)
Background: Olive mill wastewater (OMW) is characterized by its high organic content and refractory compounds. The aim of this study was to evaluate and compare the efficiency of UV/O3 and UV/ acetylacetone (UV/AcAc) processes for treatment of pretreated OMW by coagulation/microfiltration (C&M) process.
Methods: In this study, a laboratory-scale UV plug flow reactor with ancillary equipment was fabricated. The experimental factors including initial pH (5-9), O3 dosages (1.5-4.5 g/h), and AcAc concentrations (0.01-0.03 M) were measured. For both processes, a reaction time of 120 min was considered. The effect of these variables on removal of wastewater contaminants including BOD, COD, TSS, turbidity, phenol, oil, and grease were investigated.
Results: Results showed that raw OMW has a high load of pollutants and very low biodegradability (BOD5/COD = 0.12). In UV/O3 process, the optimal conditions were obtained at pH 8 and ozone injection at 4 g/h. The combined C&M-UV/O3 process removed 78.75% COD, 46.66% BOD5, 90.88% total phenol, 91.78% TSS, 99.14% oil and grease, and 98.38% turbidity, with promotion of BOD5/ COD from 0.12 to 0.33. In UV/AcAc process, the optimal conditions were achieved at pH 5 and AcAc concentration of 0.03 M. The combined C&M-UV/AcAc process removed 58.75% COD, 67.58% BOD5, 38.03% total phenol, 83.50% TSS, 93.65% oil and grease, and 95.00% turbidity, with promotion of BOD5/ COD from 0.12 to 0.22.
Conclusion: The results showed that the UV/O3 process is completely superior to the UV/AcAc process for removal of OMW contaminants, as well as promoting the biodegradability of OMW.
Keywords: Olive mill wastewater (OMW), Treatment, UV/O3, UV/AcAc, Biodegradability
Full-Text [PDF 721 kb]   (335 Downloads)    
Type of Study: Original Article | Subject: Special
Received: 2022/04/26 | Accepted: 2022/03/26 | Published: 2022/06/22
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA

Ethics code: IR.SBMU.PHNS.REC.1398.050



XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Radmehr R, Rafiee M, Yazdanbakhsh A. Comparing the performance of UV/Acetylacetone and UV/O3 processes for treatment of olive mill wastewater. Environ. Health Eng. Manag.. 2022; 9 (2) :115-123
URL: http://ehemj.com/article-1-938-en.html


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 9, Issue 2 (Spring 2022) Back to browse issues page
مجله مدیریت و مهندسی بهداشت محیط Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.05 seconds with 30 queries by YEKTAWEB 4422