[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
Main Menu
Home::
Journal Information::
Articles archive::
For Authors::
For Reviewers::
Registration::
Contact us::
Site Facilities::
::
Search in website

Advanced Search
..
Receive site information
Enter your Email in the following box to receive the site news and information.
..
Open Access
AWT IMAGE
..
MeSH Browser

AWT IMAGE

..
Scopus quartile
..
Google Scholar

Citation Indices from GS

AllSince 2020
Citations35452906
h-index2724
i10-index12399

..
ORCID
..
EBSCO
..
:: Search published articles ::
Showing 2 results for Rafiee

Mohammad Rafiee , Mahsa Jahangiri Rad , Arash Afshari,
Volume 4, Issue 3 (Summer, 2017)
Abstract

Background: Polycyclic aromatic hydrocarbons (PAHs), which consist of fused conjugated aromatic rings, not only are toxic to humans and other living organisms, but will also pollute groundwater. These compounds can be point source or non-point source and are one of the most widespread organic pollutants. Some of them are suspected carcinogens and are linked to other health problems. This study was carried out to assess the petroleum hydrocarbon phytoremediation potential of the Aeluropus littoralis species. Accumulation of PAHs in roots and upper parts of A. littoralis has been determined. Translocation factor (TF) was also calculated.
Methods: In this study, soil samples were taken from the vicinity of Isfahan oil refinery, and the PAHs compounds were analyzed with gas chromatography. One-meter soil columns were prepared from the control and contaminated soil. Unplanted A. littoralis treatments were also prepared to eliminate the effects of environmental factors on the reduction of oil-based contaminants. Seventeen weeks after planting, soil columns were sampled at 25, 50, 75, and 100 cm depths, and the concentration of petroleum hydrocarbons and number of oil-degrading bacteria were counted. Moreover, the roots and shoots of A. littoralis were separated and weighed.
Results: Results indicated that A. littoralis reduced the concentration of petroleum hydrocarbons to a significantly higher extent than the control treatment. Increasing depth was associated with improved petroleum hydrocarbon concentrations and decreased number of oil-degrading bacteria. Mostly, the bioaccumulation factor (BAF) of PAHs was <1, which shows A. littoralis could be an excluder of PAHs. The results also showed that the TF of PAHs was less than one, and hence, A. littoralis could be considered as an accumulator of PAHs.
Conclusion: It can be concluded that this species is suitable for use in the phytoremediation of PAHS contamination. For further confirmation, an evaluation under field conditions should be undertaken.


Roya Radmehr, Mohammad Rafiee, Ahmadreza Yazdanbakhsh,
Volume 9, Issue 2 (Spring 2022)
Abstract

Background: Olive mill wastewater (OMW) is characterized by its high organic content and refractory compounds. The aim of this study was to evaluate and compare the efficiency of UV/O3 and UV/ acetylacetone (UV/AcAc) processes for treatment of pretreated OMW by coagulation/microfiltration (C&M) process.
Methods: In this study, a laboratory-scale UV plug flow reactor with ancillary equipment was fabricated. The experimental factors including initial pH (5-9), O3 dosages (1.5-4.5 g/h), and AcAc concentrations (0.01-0.03 M) were measured. For both processes, a reaction time of 120 min was considered. The effect of these variables on removal of wastewater contaminants including BOD, COD, TSS, turbidity, phenol, oil, and grease were investigated.
Results: Results showed that raw OMW has a high load of pollutants and very low biodegradability (BOD5/COD = 0.12). In UV/O3 process, the optimal conditions were obtained at pH 8 and ozone injection at 4 g/h. The combined C&M-UV/O3 process removed 78.75% COD, 46.66% BOD5, 90.88% total phenol, 91.78% TSS, 99.14% oil and grease, and 98.38% turbidity, with promotion of BOD5/ COD from 0.12 to 0.33. In UV/AcAc process, the optimal conditions were achieved at pH 5 and AcAc concentration of 0.03 M. The combined C&M-UV/AcAc process removed 58.75% COD, 67.58% BOD5, 38.03% total phenol, 83.50% TSS, 93.65% oil and grease, and 95.00% turbidity, with promotion of BOD5/ COD from 0.12 to 0.22.
Conclusion: The results showed that the UV/O3 process is completely superior to the UV/AcAc process for removal of OMW contaminants, as well as promoting the biodegradability of OMW.


Page 1 from 1     

Environmental Health Engineering And Management Journal Environmental Health Engineering And Management Journal
Persian site map - English site map - Created in 0.08 seconds with 38 queries by YEKTAWEB 4700